Изменения в RouterOS:Release 6.37

Материал из MikroTik WiKi rus
Перейти к: навигация, поиск

Изменения в MikroTik RouterOS 6.37 (2016-Sep-23 08:20):

--- IMPORTANT! WIRELESS PACKAGE CHANGES:

There will be only one "wireless" package starting from RouterOS v6.37.

--- IMPORTANT! DFS CHANGES:

DFS configuration in RouterOS has been redesigned, now device looks at specified country settings (/interface wireless info country-info), and applies corresponding DFS mode for each frequency range automatically, making dfs-mode setting unnecessary.

Please, check that your frequencies work with corresponding DFS settings before upgrade.

!) console - dfs-mode setting does not exist any more and all scripts with such setting will not be executed;
!) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=110424);
!) dude - from now on dude will use winbox port and it will be changed automatically both in client loader and agent configuration;
!) ethernet - added new loop-protect feature for ethernet, vlan, eoip, eoipv6 interfaces, http://wiki.mikrotik.com/wiki/Manual:Loop_Protect ;
!) wireless - "wireless" package included in bundle "routeros" package;
!) wireless - "wireless-cm2" discontinued;
!) wireless - "wireless-rep" renamed to "wireless";
!) wireless - DFS option is removed, corresponding DFS mode for each frequency range applies automatically;

  • capsman - fixed kernel crash on cap while changing client-to-client forwarding;
  • capsman - report radio-name in registration table;
  • certificate - do not allow to remove certificate template while signing certificate;
  • console - hotspot setup show wrong certificate name;
  • defconf - fixed default configuration restore if virtual wireless interface were present;
  • defconf - fixed default configuration when wireless package is used;
  • defconf - using caps button now forces all wireless interfaces in caps mode;
  • dhcpv6 - improved interface status tracking;
  • dhcpv6 - reworked DHCP-PD server interface and route management;
  • dhcpv6 - update DUID when system-id changes (solves problem when cloned VM retains the same DUID);
  • dns - fixed crash when using regexp static dns entries;
  • ethernet - added support for LAN9514 ethernet dongle;
  • ethernet - allow to force mtu value when actual-mtu is already the same;
  • ethernet - fixed loop-protect on bridged ports;
  • ethernet - fixed never ending loop in CDP packet processing;
  • ethernet - fixed rare kernel failure on non-switch ethernet reset;
  • ethernet - rb44ge now have disabled-running-check=no by default;
  • firewall - added additional matchers for firewall raw rules;
  • firewall - fixed time based rules on time/timezone changes (again);
  • gps - always check NMEA checksum if available;
  • health - do not show psu and fan information for passive cooling devices;
  • hotspot - show comments from user menu also in active menu;
  • ipsec - fixed crash with enabled fragmentation;
  • ipsec - fixed dynamic policy not deleted on disconnect for nat-t peers;
  • ipsec - fixed fragmentation use negotiation;
  • ipsec - fixed kernel crash when sha512 was used;
  • ipv6 - fixed RA and RS processing on new interfaces after many interfaces have lost link during prolonged operation;
  • ipv6 - improved system responsiveness when ipv6 routes are frequently modified;
  • ipv6 - show multiple neighbors with the same address;
  • kvm - fix add/remove of disabled interfaces;
  • kvm - fixed guest crashing when using mtu bigger than 1504;
  • l2tp - fixed kernel failure when fastpath handles l2tp packets;
  • leds - added option to disable all leds on RBcAP2n;
  • lte - added ability to send/receive sms using '/tool sms';
  • lte - added dlink dwm-157 D, dwm-222 support;
  • lte - added huawei me909s variant;
  • lte - added initial deregistration only for bandrich modems;
  • lte - added logging for usb config switching;
  • lte - added Pantech UML295, Vodafone K4201-Z, ZTE MF823/MF831 support;
  • lte - added rndis for ZTE MF8xx;
  • lte - added support for more dlink dwm-222 configurations;
  • lte - added switch for Huawei K5160;
  • lte - added zte K5008-Z back;
  • lte - adjusted usb config for dlink dwm-157 D;
  • lte - fixed at chat condition storage;
  • lte - fixed band setting for sxt lte;
  • lte - fixed band unsetting;
  • lte - fixed default channels for dlink dwm-157;
  • lte - fixed ip activation when CREG (circuit switched) state remains in not registered state;
  • lte - fixed setting correct lte band for sxt lte;
  • lte - process initial state change to deregistred, when lockup occurs;
  • lte - reset if sms storage set fails;
  • mpls - fixed memory leak;
  • mpls - fixed vpls throughput issues caused by out-of-order packets;
  • ntp - fixed ntp server when local-clock used (like usb gps module);
  • partitions - added ability to add comments;
  • ppp - use default-route-distance when adding ipv6 default route;
  • ppp,lte - pin is now converted to string argument;
  • pppoe - fixed disconnects by idle timeout when fastpath is used;
  • quickset - added 2GHz-g/n band support;
  • quickset - fixed guest reporting in "home ap dual" mode;
  • quickset - fixed wireless frequency fields in "home ap dual" mode;
  • rb3011 - fixed rare occasions when router would hang while loading kernel;
  • routing - improved kernel performance in setups with large routing tables;
  • sfp - enabled eeprom printout in /interface ethernet monitor;
  • sfp - fixed initial eeprom reading on CCR1036-8G-2S+ and CCR1072-1G-8S+;
  • sfp - removed "sfp-rate-select" as command was not relevant to currently supported hardware;
  • sms - moved incorrectly logged message from async to gsm topic;
  • sms - report error when unsupported modem is being used;
  • snmp - added script table which executes script and returns it's output on get request;
  • snmp - require write permitions for script run table access;
  • snmp - skip forbidden oids on getnext completion;
  • sstp - allow to specify proxy by dns name;
  • sstp - now supports TLS_ECDHE algorithms;
  • supout - fixed bug that could cause enormous size supout.rif files;
  • supout - improved crash report generation for tile architecture;
  • switch - added comment field for CRS switch VLANs;
  • traffic-flow - allow ipv6 src address to be optional;
  • traffic-flow - fixed IPFIX packet timestamp;
  • traffic-flow - fixed IPFIX wrong flow sequence;
  • trafficgen - add per stream packet count setting;
  • trafficgen - show out-of-order packet counters in stats printouts;
  • tunnel - fixed communication via tunnel to router itself if fastpath was active;
  • tunnel - fixed ipv6 link-local address adding for gre;
  • tunnel - increased minimal MRRU to 1500 for PPP interfaces;
  • tunnel - ipv6 link-local address is now generated from tunnel local-address;
  • usb - added support for SMSC95XX USB Ethernet dongle on mipsbe;
  • usermanager - fixed rare crash on paypal payment;
  • users - fixed script policy checking against user policies when running scripts;
  • webfig - do not crash if radius server does not give out encryption keys;
  • webfig - fixed certificate signing;
  • winbox - added auto refresh for BFD neighbors;
  • winbox - added comment field support for switch vlan menu;
  • winbox - added default-authentication parameter for wireless station modes;
  • winbox - added src-address field for traffic-flow target;
  • winbox - adjust on-event field dynamically depending on window size;
  • winbox - adjusted allowed values for http-proxy field;
  • winbox - disabled MRRU by default for PPP interfaces;
  • winbox - display actual-mtu for tunnels in interfaces window;
  • winbox - fixed disconnect when no windows were opened for a while in unsecure mode;
  • winbox - fixed multiline read only fields not displaying new line characters;
  • winbox - fixed raw firewall showing jump targets from filter chains;
  • winbox - hide ethernet flow control settings for interfaces which does not support them;
  • winbox - removed health menu from devices that do not support it;
  • winbox - removed L2MTU field for PPP interfaces;
  • winbox - removed L2MTU field from PPP server binding settings;
  • winbox - removed unset button for L2MTU field;
  • winbox - show firmware-type in routerboard window;
  • wireless - display DFS flag in country info;
  • wireless - improved driver support for RB953, hAP ac, wAP ac;
  • wireless - send deauth to data frames in scan mode.
  • wireless - updated brazil country settings;