Изменения в RouterOS:Release 6.35

Материал из MikroTik WiKi rus
Перейти к: навигация, поиск

What's new in 6.35 (2016-Apr-14 12:55):

  • arp - apply Linux Kernel patch to stop RouterOS from randomly exhibiting misplaced ARPs;
  • mipsbe - (excluding RB4xx and CRS series) fixed rare ethernet tx buffer corruption;
  • nand - implemented once a week nand refresh to improve stored data integrity (will increase sector writes);
  • pppoe-client - implemented fastpath support;
  • l2tp - implemented l2tp and lns fastpath/fasttrack support;
  • queue - added bucket-size setting to queues (derived from max-limit);
  • tile - fixed rare situation when some cores decide not to take part in packet processing till next reboot;
  • tunnels - fixed performance slowdown on any other tunnel disable/enable;
  • winbox - increased minimal required winbox version to 3.4;
  • wireless - added new package "wireless-rep";
  • wireless - improved 1-chain 802.11ac station compatibility with other vendor multi-chain APs;
  • address-list - fixed crash in low memory situations;
  • bonding - fixed crash when creating vlans on bonding interface;
  • capsman - added 802.11g/n band;
  • capsman - fixed capsman extension channel names;
  • certificate - revoked certificates not showing as (R)evoked;
  • certificate - allow manual crl url addition;
  • chr - added support for VLAN on Hyper-V;
  • chr - fixed Hyper-V booting from SCSI;
  • chr - fixed Hyper-V on windows 8/10 reboot loop;
  • chr - fixed bridge firewall;
  • chr - fixed kernel crash when virtual ethernet was not connected to anything in Hyper-V;
  • chr - implemented automatic storage increase on disk image size increase;
  • chr - implemented kernel crash saving to autosupout.rif (will utilize additional 24Mb of RAM);
  • chr - make shutdown request from hyper-v work (might fix other hypervisor as well);
  • chr - no more installation on first boot;
  • chr - try to renew expired license once a hour instead of 100h;
  • cloud - don't write minor status changes to storage;
  • console - fixed print follow in "/ip dns cache" menu;
  • console - show RouterOS Version in /interface wireless scan;
  • console - sort completions/hints in natural order;
  • console - update copyright notice;
  • defconf - fixed default configuration for SXT LTE;
  • dhcpv6-client - fixed wrong error message;
  • dhcpv6-client - fix ia expiration and lifetime validation;
  • dhcpv6-server - acquire binding on renew if it does not exist;
  • dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=104395);
  • dude - fixed dude login logging, no more shows as winbox login;
  • email - fixed send cmd server addr override;
  • ethernet - add option to see S-GPON-ONU module, GPON side SN in "/int eth mon sfp#";
  • ethernet - do not allow to set self as master port;
  • export - bonding did not show up in global export;
  • export - exclude default values from export in "/interface l2tp-server server" menu;
  • export - fixed export when ipv6 address was taken from pool;
  • export - fixed rare situations when not whole config was exported;
  • export - updated defaults for compact export;
  • fastpath - fixed crash when packet arrives on disabled interface;
  • fastpath - fixed show rx-bits-per-second on all VLAN interfaces;
  • fastpath - improved vlan fastpath;
  • fasttrack - fixed timer updating in connections table for fasttrack connections;
  • fetch - decrease connection idle timeout;
  • firewall - added experimental "action=route" in mangle prerouting - that forces packets to specific gateway by ignoring routing decisions (CLI oly);
  • health - always report fan speed (even if it is 0);
  • health - swap fan2 and fan3 on CCR1072;
  • hotspot - clean-up all dead entries at once;
  • hotspot - fixed possible deadlock;
  • hotspot - improved html page resistance against attacks;
  • hotspot - make video tag work properly on hotspot login.html page
  • ip - rename max-arp-entries to less confusing max-neighbor-entries;
  • ippool6 - fixed potential crash;
  • ipsec - always re-key ph1 because it was possible that ph1 without DPD would expire;
  • ipsec - better flush on proposal change;
  • ipsec - fixed crash on policy update;
  • ipsec - fixed fast ph2 SA addition;
  • ipsec - fixed larval SA refresh for display;
  • ipsec - fixed multiple consecutive dynamic policy flush;
  • l2tp & pppoe - fixed user traffic accounting when fastpath was used;
  • l2tp - introduced per tunnel allow-fast-path option;
  • l2tp - added support for Hidden AVP, it is needed for proxy authentication;
  • l2tp - added support for max-sessions;
  • l2tp - added support for proxy authentication when receiving forwarded PPPoE sessions;
  • l2tp - fixed small memory leak on reconnects;
  • lcd - fixed branding packet logo drawing on startup;
  • led - fixed crash on assigned interface removal;
  • led - turn on fault led on CCR1072 if CPU too hot;
  • leds - fixed AP-CAP led blinking after successful association to CAPsMAN;
  • lte - added ipv6 support for SXT LTE;
  • lte - changed AT command processing;
  • lte - changed AT parsing because supported Huawei modems use unsolicited events instead of polling;
  • lte - fixed bandlux modem dialing;
  • lte - fixed crash on early initialization;
  • lte - improve situation when SXT modem never finds operator;
  • lte - replaced signal-strength with rssi in info command;
  • lte - support Alt38XX modem;
  • lte - support for zte mf820s2;
  • lte - supported modems now use unsolicited events for network monitoring;
  • lte - use timer for modem info;
  • map lite - added hardware WPS button support;
  • mpls - do not reset VPLS on TE tunnel re-optimize;
  • ntp - fixed ntp client hangs in reached state;
  • ospf - fixed crash when getting neighbor router-id in NBMA area;
  • ppp - fixed ppp interface reconnect when uPnP was used;
  • ppp - close connection if peer wants to re-authenticate;
  • ppp - fixed memory leak high number of pppoe clients to the same server;
  • ppp - fixed ppp crash if lcp packets were lost and authentication got delayed;
  • ppp - fixed some clients can not connect due to LCP restart;
  • pppoe - added rfc4679 support;
  • pppoe - fixed crash when removing pppoe service;
  • pppoe-server - added pado-delay option;
  • profiler - classify certificate signing;
  • proxy - fixed ftp request url decode;
  • queue - improve "/queue interface" menu;
  • quickset - fixed invalid date adjusted the signal threshold for the signal chart and refresh rate;
  • quickset - fixed situations when hidden password was passed as ******* from winbox nd webfig;
  • radius - warn radius client if incorrect secret is being used;
  • rb3011 - fixed sfp compatibility with CCR when using direct attached cables;
  • rb3011 - fixed time keeping;
  • rb3011 - make ether6-ether10 work if SFP module is present on bootup;
  • romon-ssh - fixed active addresses for romon user;
  • route - do not show duplicate gateway on connected route;
  • route - fixed filter by routing table;
  • routing - fixed rare kernel failure on different dynamic routing configurations;
  • routing - fixed routing-marks were not erased from memory when they are not being used;
  • services - do not show ssh entry under ip services if security package is disabled;
  • snmp - don't group oids for bulk get with maxreps > 1 ;
  • snmp - fixed cpu load reporting to 1min average and change oid to 1.3.6.1.4.1.2021.11.10.0;
  • snmp - fixed dhcpv4 lease hwaddr format according to mib;
  • snmp - fixed getbulk result ordering with multiple request OIDs;
  • ssh - simplify login process;
  • ssl - optimized certificate update;
  • system - log time changes;
  • tile - corrected max-l2mtu;
  • tile - fixed fastpath related memory leak;
  • tile - fixed performance regression on switch chip (introduced in 6.33rc18);
  • tile-crypto - fixed minor memory leak;
  • tool fetch - fixed https cleanup on user stop while handshaking;
  • trafficgen - fixed console arguments;
  • trafficgen - fixed crash when unexpected stream reappears;
  • trafflow - fixed potential deadlock;
  • ups - fixed entering hibernate mode when below battery capacity limit;
  • users - added separate RoMoN policy;
  • webfig - fixed firewall rule sorting did not work in other chains except all;
  • webfig - show single item groups as optional values;
  • webfig - sort numeric columns numerically even if they contain some text;
  • winbox - added "pw-type" to "/interface vpls bgp-vpls" menu;
  • winbox - added "use-control-word" and "pw-mtu" to "/interface vpls cisco-bgp-vpls" menu;
  • winbox - added /interface wireless setup-repeater;
  • winbox - added all the rates settings to the capsman;
  • winbox - added flip-screen option to lcd settings;
  • winbox - added init-delay option to routerboard settings;
  • winbox - added ipv6 firewall missing log option;
  • winbox - added missing eap-ttls-mschamv2 method to wireless security profile;
  • winbox - added mtu=auto support to eoipv6 tunnel;
  • winbox - added sfp-mac for GPON interfaces;
  • winbox - added support for new settings from wireless-rep package;
  • winbox - added support for route action in mangle rules;
  • winbox - allow to set additional-network-modes;
  • winbox - allow to set multiple dh-groups;
  • winbox - disable autostart for wireless scan,snooper,align etc. on open;
  • winbox - do not show "enable-jumper-reset" setting on devices without serial port;
  • winbox - do not show real-tx-power column in current-tx-power by default;
  • winbox - fixed unset options in /routing ospf interface menu;
  • winbox - hotspot default-trial user shows profile as "unknown" in Winbox;
  • winbox - improved winbox connection loss detection, fixes winbox safe mode;
  • winbox - limit ospf key to 16 symbols;
  • winbox - make additional-network-mode optional for lte interface;
  • winbox - make build with latest lte changes;
  • winbox - make mrru disabled and set mtu+mru to auto by default on new servers;
  • winbox - show "usb-power-reset" option on all boards that have it;
  • wireless - fixed crash on nstreme-dual interface stats update;
  • wireless-rep - added 802.11g/n only band;
  • wireless-rep - added STEP feature for the scan-list;
  • wireless-rep - added WPS client support;
  • wireless-rep - added support for saving wireless scan results to file;
  • wireless-rep - added support for wireless background scan for 802.11 protocol;
  • wireless-rep - added support for wireless repeater mode for 802.11 protocol;
  • wireless-rep - added support for wireless scan rounds setting;
  • wireless-rep - adjust roaming scan times;
  • wireless-rep - allow to connect to AP after scan;
  • wireless-rep - do not allow empty ssid for AP modes;
  • wireless-rep - fixed crash on non-HT clients;
  • wireless-rep - fixed latency issues with Intel wireless clients;
  • wireless-rep - fixed nv2 protocol;
  • wireless-rep - fixed qos frame-priority when nv2 protocol used in station-wds mode;
  • wireless-rep - fixed signal leds;
  • wireless-rep - fixed speed issue when connected with Intel 802.11ac;
  • wireless-rep - initial support for station roaming for station mode in 802.11 protocol;
  • wireless-rep - request interface name for setup-repeater;
  • wireless-rep - use full identity where possible;
  • wireless-rep,capsman - added more configuration settings;
  • wireless-rep,capsman - added rate config support.